UK's Hydraulic Cylinders and Systems Market to Grow at a CAGR of +1.7% Reaching $3.1B by 2035 - News and Statistics - IndexBox

Apr 05, 2025

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

IndexBox has just published a new report: United Kingdom - Hydraulic Cylinders And Systems - Market Analysis, Forecast, Size, Trends And Insights.

The UK market for hydraulic cylinders and systems is set to experience continued growth over the next decade, with a forecasted CAGR of +0.2% in volume and +1.7% in value from 2024 to 2035. By the end of 2035, the market is projected to expand to 1M units and $3.1B in nominal prices.

Driven by increasing demand for hydraulic cylinders and systems in the UK, the market is expected to continue an upward consumption trend over the next decade. Market performance is forecast to retain its current trend pattern, expanding with an anticipated CAGR of +0.2% for the period from 2024 to 2035, which is projected to bring the market volume to 1M units by the end of 2035.

In value terms, the market is forecast to increase with an anticipated CAGR of +1.7% for the period from 2024 to 2035, which is projected to bring the market value to $3.1B (in nominal wholesale prices) by the end of 2035.

For the third consecutive year, the UK recorded decline in consumption of hydraulic cylinders and systems, which decreased by -0.6% to 993K units in 2024. Overall, consumption, however, showed a relatively flat trend pattern. Over the period under review, consumption reached the maximum volume at 1.4M units in 2021; however, from 2022 to 2024, consumption failed to regain momentum.

The value of the hydraulic cylinder and system market in the UK declined slightly to $2.6B in 2024, dropping by -1.8% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, the total consumption indicated notable growth from 2013 to 2024: its value increased at an average annual rate of +2.9% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, consumption decreased by -3.5% against 2022 indices. Hydraulic cylinder and system consumption peaked at $3.1B in 2019; however, from 2020 to 2024, consumption remained at a lower figure.

In 2024, production of hydraulic cylinders and systems in the UK stood at 807K units, remaining stable against the previous year. Over the period under review, production, however, saw a relatively flat trend pattern. The growth pace was the most rapid in 2018 when the production volume increased by 21%. Over the period under review, production hit record highs at 823K units in 2013; however, from 2014 to 2024, production failed to regain momentum.

In value terms, hydraulic cylinder and system production stood at $2.6B in 2024 estimated in export price. Overall, the total production indicated pronounced growth from 2013 to 2024: its value increased at an average annual rate of +3.1% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2024 figures, production increased by +1.2% against 2021 indices. The most prominent rate of growth was recorded in 2018 when the production volume increased by 46%. Over the period under review, production hit record highs at $3B in 2019; however, from 2020 to 2024, production remained at a lower figure.

For the third year in a row, the UK recorded decline in overseas purchases of hydraulic cylinders and systems, which decreased by -13.2% to 293K units in 2024. In general, imports, however, enjoyed moderate growth. The pace of growth appeared the most rapid in 2021 with an increase of 53% against the previous year. As a result, imports reached the peak of 699K units. From 2022 to 2024, the growth of imports remained at a lower figure.

In value terms, hydraulic cylinder and system imports stood at $412M in 2024. Over the period under review, imports, however, posted strong growth. The most prominent rate of growth was recorded in 2018 with an increase of 53% against the previous year. Over the period under review, imports attained the peak figure in 2024 and are expected to retain growth in the near future.

Italy (85K units), India (61K units) and Japan (27K units) were the main suppliers of hydraulic cylinder and system imports to the UK, with a combined 59% share of total imports. Ireland, Germany, China, Romania, Poland, Sweden, the United States and Spain lagged somewhat behind, together accounting for a further 37%.

From 2013 to 2024, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Romania (with a CAGR of +100.4%), while imports for the other leaders experienced more modest paces of growth.

In value terms, the United States ($164M) constituted the largest supplier of hydraulic cylinders and systems to the UK, comprising 40% of total imports. The second position in the ranking was held by Germany ($42M), with a 10% share of total imports. It was followed by India, with a 9% share.

From 2013 to 2024, the average annual rate of growth in terms of value from the United States amounted to +9.3%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (+10.6% per year) and India (+28.5% per year).

In 2024, the average hydraulic cylinder and system import price amounted to $1.4 thousand per unit, surging by 16% against the previous year. In general, the import price enjoyed a temperate expansion. The most prominent rate of growth was recorded in 2022 an increase of 91%. The import price peaked in 2024 and is likely to see gradual growth in the near future.

There were significant differences in the average prices amongst the major supplying countries. In 2024, amid the top importers, the country with the highest price was the United States ($25 thousand per unit), while the price for Italy ($375 per unit) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was attained by the United States (+10.3%), while the prices for the other major suppliers experienced more modest paces of growth.

After four years of growth, shipments abroad of hydraulic cylinders and systems decreased by -26.2% to 106K units in 2024. Overall, exports, however, continue to indicate a relatively flat trend pattern. The growth pace was the most rapid in 2023 with an increase of 47%. As a result, the exports attained the peak of 144K units, and then dropped remarkably in the following year.

In value terms, hydraulic cylinder and system exports rose rapidly to $483M in 2024. Over the period under review, exports, however, continue to indicate prominent growth. The growth pace was the most rapid in 2018 with an increase of 59%. Over the period under review, the exports attained the maximum in 2024 and are expected to retain growth in the near future.

India (42K units) was the main destination for hydraulic cylinder and system exports from the UK, accounting for a 40% share of total exports. Moreover, hydraulic cylinder and system exports to India exceeded the volume sent to the second major destination, the United States (8.8K units), fivefold. Germany (5.7K units) ranked third in terms of total exports with a 5.4% share.

From 2013 to 2024, the average annual rate of growth in terms of volume to India amounted to +42.4%. Exports to the other major destinations recorded the following average annual rates of exports growth: the United States (-5.5% per year) and Germany (+0.8% per year).

In value terms, the United States ($158M) remains the key foreign market for hydraulic cylinders and systems exports from the UK, comprising 33% of total exports. The second position in the ranking was held by Germany ($68M), with a 14% share of total exports. It was followed by France, with a 9.3% share.

From 2013 to 2024, the average annual growth rate of value to the United States stood at +11.7%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (+19.7% per year) and France (+20.9% per year).

In 2024, the average hydraulic cylinder and system export price amounted to $4.5 thousand per unit, increasing by 55% against the previous year. Over the period under review, the export price enjoyed buoyant growth. Over the period under review, the average export prices reached the peak figure at $4.7 thousand per unit in 2019; however, from 2020 to 2024, the export prices remained at a lower figure.

There were significant differences in the average prices for the major export markets. In 2024, amid the top suppliers, the country with the highest price was the United States ($18 thousand per unit), while the average price for exports to India ($520 per unit) was amongst the lowest.

From 2013 to 2024, the most notable rate of growth in terms of prices was recorded for supplies to Germany (+18.8%), while the prices for the other major destinations experienced more modest paces of growth.

Source: IndexBox Market Intelligence Platform

This report provides an in-depth analysis of the market for hydraulic cylinder and system in the UK. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

Making Data-Driven Decisions to Grow Your Business

A Quick Overview of Market Performance

Understanding the Current State of The Market and Its Prospects

Finding New Products to Diversify Your Business

Choosing the Best Countries to Establish Your Sustainable Supply Chain

Choosing the Best Countries to Boost Your Exports

The Latest Trends and Insights into The Industry

The Largest Import Supplying Countries

The Largest Destinations for Exports

The Largest Producers on The Market and Their Profiles